(+91) 8879803647  Call Now hello@ezenith.in

Comprehensive Automobile Development Internship (CADI) 2017 A 8 days exclusive internship program on advanced automobile technologies with real time industry experts.

Apply for Internship

COMPREHENSIVE AUTOMOBILE DEVELOPMENT INTERNSHIP

REGISTER NOW , Limited Seats Available
(We would not Entertain any registration after the seats are full )

Hightlights of CADI 2017

  • Course curriculum designed by our reputed experts from reputed OEMs like Hyundai, Ford, Ashok Leyland, Mahindra, Autodesk etc. and research organizations like IITs, DRDO etc.
  • Practical hands-on sessions in each and every concept which is taught.
  • Work on live automobile equipments
  • Work on a live project along with our industrial experts.
  • Internationally recognized Certification as “internship in advanced automotive technology” to all the participants.
  • Interactive soft skill sessions from HRs of automotive industry.
  • Top interns in our program would get an opportunity to work with our industrial experts on research projects and assistance in their higher studies/ job/ Ph.D.

Who can Participate

  • B.E/B.Tech – Automobile, Mechanical, Metallurgical, Production and Industrial engineering students.
  • Engineers interested in pursuing further studies on part time or full time basis.
  • Diploma Students pursing mechanical and automobile engineering.
  • Automotive enthusiasts (under grad & Graduate’s).

Internship

Schedule

  • Basics of I.C.Engines - Evolution, Classification and Applications
  • Components of I.C.Engines – Function, Materials and Failure Modes
  • Intake & Exhaust Manifold Design and Simulation Demonstration
  • S.I and C.I Engines – Valve Timing, Heat Release and Combustion Analysis
  • Advanced IC Engines- MPFi CRDi, TDi, HCCI
  • Gasoline Direct Injection (GDI)
  • Turbocharging –Types & Comprehensive Theory Compressor Maps, Turbo Matching & Failure Modes
  • Advanced Two-Wheeler Technologies – Twin Spark, Triple Spark, APDV/ASFS/ATFT, Start-Stop
  • "GROUP Project Allotment"
  • Engine Downsizing – A Brief Study
  • S.I and C.I Engine – Emission Analysis and Emission Control Technology-BS4 to BS6
  • Automotive Transmissions- Manual & Automatic, Drivetrain Components, Differential Tech.
  • Concepts & Calculations of Drivetrain (Road Loads and Tractability, Gear Ratios, Air Drag)
  • Elementary Tire Patch Forces and Moments: Forces and Moments at the Tire Contact Patch
  • Powertrain System Dynamics required to produce vehicle motive force at the tire patch
  • Performance prediction in acceleration and fuel economy
  • Practical Hands-on Experience via Assembly & Disasembly Car and Bike Engines.
  • Demonstration session on Engine Components- EGR, Turbo, Fuel Pump & Rail, Oil Filter-Cooler,
  • Intercooler, Intake Manifold, ECU, Injectors, Catalytic Converter.
  • Practical Hands-on Experience via Assembly & Disasembly Car and Bike Engines.
  • Demonstration session on Engine Components- EGR, Turbo, Fuel Pump & Rail, Oil Filter-Cooler,
  • Intercooler, Intake Manifold, ECU, Injectors, Catalytic Converter.
  • Layout of the Chassis and its main Components/Members
  • Functions & Types of the Chassis Frame
  • Chassis Integration, Design Parameters & Material Selection
  • Different types and Requirements of Bodies used in automobiles
  • Aerodynamics Consideration for Body Designing
  • Analytical Demo- Impact Structure Design Parameters, Testing Methods and Product Cost Estimation
  • Introduction & Effective Metrics for Vehicle Dynamics.
  • Vehicle system, subsystem and piece-part metrics used to link vehicle dynamics to vehicle system design and development: bounce frequencies, lateral acceleration gain, understeer gradient, roll gradient, roll stiffness, etc.
  • Brakes
  • Brake system Anatomy and Architecture
  • Braking Dynamics: Braking Forces, Weight transfer, Centre of Gravity, Brake force distribution, stability, Pedal force gain, Brake proportioning and Braking efficiency.
  • Brake System Performance Prediction
  • Stopping Distance -- Actual vs. magazine; Contributions of Subsystems; Effects of Driver.
  • Thermal management -- Conservation of Energy; Design for max speed vs. high use
  • Brake Balance and System Output Calculations for different Conditions
  • Advanced Braking
  • Anti-lock Braking Systems & EBD
  • Performance Panic brake assist.
  • Hybrid/regenerative braking
  • Practical Hands-on and Demonstration Session on Braking System.
  • Suspension System
  • Suspension System Anatomy & Performance requirements relative to Drive-off, Braking, Ride and Handling
  • Solid live axles, twist beam suspensions and independent suspensions
  • Side view pitch poles and pitch axis considerations: anti-squat and anti-dive suspension geometry, wheel travel and caster geometry.
  • Role axis considerations: roll center location, roll axis geometry and location, wheel travel and toe geometry, wheel travel and camber geometry.
  • Steering Systems
  • Steering system Anatomy, architecture and performance requirements
  • Steering geometry, wheel geometry, steering system forces and moments, steering ratio, steering compliance
  • Experimental methods for steering system performance evaluation and development
  • Roll-Over Fundamentals
  • Suspension system and steering system considerations
  • Practical Hands-on
  • Demonstration of various suspension and steering system components.
  • Ride Fundamentals Case Study – Software Demonstration:
  • Straight line and Cornering: Input excitation signals: road roughness, vehicle sources (tire/wheel system, driveline and engine), Vehicle response properties: suspension isolation, tire vertical stiffness, spring rate ratio, suspension stiffness, ride rate, suspension damping, pitch and bounce frequencies
  • Embedded controls systems in Automobile
  • Computer based controls in Automobiles
  • Practical Session on ECU Kit Demo, Engine Electronics - Inlet to Outlet Sensors & Actuators, OBD.
  • NVH & Safety Systems
  • Noise Reduction Techniques in Automobiles
  • Driver Assitance Systems – Lane Departure Warning Sys, Predictive Emergency Braking Sys, Adaptive Cruise Control, Blind Spot, Night Vision Camera, Advanced Forward Lighting systems, Airbags.
  • "Industrial Project Review"
  • Interview Skill’s and Further Career Development Q&A
  • Resume Writing & Interview Tips – What the Industry Looks For?
  • Certification & Closing Ceremony.

Partial Payment Option Upload Details

InternshipCenters

Payment Procedure for CADI 2017

  • Cost of the Internship: Rs. 5000/- Per Head
  • In order to confirm with the registration you are requested to pay the course fee on any of the following options.
    • Direct Bank Deposit
    • Internet Banking
    • Explara Payment on our website
  • Bank Account Details :
    • Account Name:Ezenith Education
    • Account Type:Current
    • Bank:Oriental Bank of Commerce
    • Account Number:11201131000471
    • IFSC Code:ORBC0101120 (Use this code if you’re doing Internet banking)
  • After Depositing the fee, Upload the scanned copy of the counterfoil to ”Upload Details” tab
    • Content: 1. Attachments informed below, 2. Details of the participants- Name, College Name, Mail Id, Contact Number, date of payment
    • Attachment: Scanned copy of the Counterfoil and passport size photo.
  • Your Registration will be confirmed once you have Uploaded the scanned copy of the counter foil to above mentioned Confirmation tab.
  • Note:Without filling the above details the application will be rejected straightaway.

Group Registration Group Discount

  • 1 Participant : Internship Fee per participant is Rs.5000 i.e (1*5000=Rs.5,000) is payable by the Individual.
  • 3-5 Participants : Internship Fee per participant is Rs.4750 i.e (3*5750=Rs.14,250) is payable by the Group.
  • 6-11 Participants : Internship Fee per participant is Rs.4500 i.e (6*4500=Rs.27,000) is payable by the Group.
  • 12-24 Participants :Internship Fee per participant is Rs.4000 i.e (12*4000=Rs.48,000) is payable by the Group.
  • 25-40 Participants :Internship Fee per participant is Rs.3500 i.e (25*3500=Rs.87,500) is payable by the Group.
  • Note 1 :Group discount available only till 1st November 2017.
  • Note 2 :All the participant fee in a group should be collected by a Group Representative and deposited in the account in a single payment.
  • Click here for part payment (advance payment)

IMPORTANT NOTES

    • Internship fees :Rs 5000 per participant includes Taxes, Registration kit, Certification Cost & Human Resources fee.(group discounts are also available).
    • Deadline for Payment : 2nd November 2017
    • (Please note that Group discount available only till 1st November 2017)
  • Participants who miss more then 3 hours of training would not be certified
  • Only limited seats per each centre available and the seats are filled on “FIRST COME & FIRST SERVE BASIS”. Your seat will be confirmed only after the confirmation of payment
  • If the seats are completed before the deadline, we will close the registrations. So make sure you grab a seat by completing the registration process at the earliest.
  • Internship fees : Rs.5000 per participant includes Taxes, Registration kit, Certification Cost & Human Resources fee.(group discounts are also available).
  • Accommodation
    (Hostel/Hotel/Dormitory) :
    Extra charges for accommodation . Fee for accommodation per student per day can be found below [This Does not includes food]:
    • Mumbai:Rs.300 per head per day
    • Bangalore:Rs.300 per head per day
    • Pune:Rs.300 per head per day
    • Hyderabad:Rs.125 per head per day (dormitory)
  • Contact Details:
    • Technical Details +91-8879803647
    • Payment Details:+91-9619727582